Yamaha FX900 FX900 Owners Manual Image - Page 44
Program, Selection, SETUP, CHANGE
View all Yamaha FX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
IIII MIDI Program Selection: MIDI SETUP and MIDI PGM CHANGE The FX900 makes it possible to select specific programs via external MIDI control. You can set up the FX900, for example, so that when you select a voice on a synthesizer the most appropriate effect for that voice is automatically selected. This is accomplished because each time you select a voice on your MIDI synthesizer it transmits the corresponding MIDI PROGRAM CHANGE NUMBER. The FX900 receives this PROGRAM CHANGE NUMBER and selects the effect program that you have assigned to it using the Program Change Table Edit function which will be described below. A more convenient idea for guitarists or bassists would be to use a MIDI foot controller such as the Yamaha MFC05 to transmit the required MIDI PROGRAM CHANGE NUMBERs. The FX900 actually can be programmed with four completely independent sets of MIDI PROGRAM CHANGE NUMBER/MEMORY NUMBER assignments. Each of these is contained in a different "bank": A, B, C or D. Each BANK may also be programmed to receive on a different MIDI channel. The four banks may be programmed with different receive channels using the Program Change Bank Edit function described below. NOTE: The selected program change assignment table also determines which effect program is selected when the optional FC900 Foot Controller is used. NOTE: A small letter "M" will appear to the right of the lower display line when MIDI data is received in the MEMORY mode. • MIDI SETUP This function makes it possible to select any of the four available program change table BANKs, and to change the MIDI receive and transmit channel for each BANK. 2 3 *VW. MENIF=',CENMKOSIMU,IFFECIPROCE5300 B. B. OPELSET 0 USE. E FEET ON OVN VEEP 0 ROIL 0 0 0 m0 00 I I 0FnFrn %I.', ex= POWER 3 1. Use the [UTILITY] key to select the MIDI SETUP display. MIDI SET UP BANK:A ch=0MNI 2. The underline cursor should be under the BANK parameter. Use the [DATA ENTRY] control or [A] and [V] keys to select the bank you wish to program (A, B, C or D). 3. Move the cursor to the "ch=" parameter by pressing the [ 4] key, then use the [DATA ENTRY] control or [A] and [V] keys to set the receive/transmit MIDI channel (1 - 16), the OMNI mode (all channels can be received, transmission on channel 1), or turn MIDI reception OFF for the selected bank. The underline cursor can be ' moved back to the BANK parameter if necessary by pressing the [ Ib.] key. 43