URC MX-350 Owners Manual - Page 14

The MX-350 4 Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE but- tons. FAV Button PAGE Buttons DEVICE Buttons MAIN Button 5 When you select a page, the top of the screen indicates whether you want to "ADD?" or "HIDE?" the page displayed. When you would like to change a page's visibility, press the LIGHT button. This page is hidden. To ADD it, press the LIGHT button. This page is visible. To HIDE it, press the LIGHT button. 6 You can continue to ADD or HIDE pages on other devices by repeat- ing Steps 4 and 5. 7 When you are finished adding and hiding pages, press the MAIN but- ton four times to return to normal operation. 24 Universal Remote Control, Inc. Erasing You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device's learned command or macro buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to the factory default condition. Erasing Learned Buttons, Macros or Favs 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note : You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 Press a PAGE button to display page two of Setup. 3 Press the ERASE button. 4 Press either the LEARN, MACRO or FAV button. The following screen appears: ALL - If you press ALL, the MX-350 displays a SURE? button. After the SURE button is pressed, all the buttons will be erased. DEVICE- If you press DEVICE, a list of Devices will appear. Press the device button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED. KEY- If you press KEY, you'll have to navigate to the Device and Page you want using the MAIN, DEVICE and PAGE buttons. Press a button to erase it. The bottom of the display will flash ERASE twice, then ERASED. To return to normal operating mode, press the MAIN button four times. 25