URC MX-350 Owners Manual - Page 12
Favorite Channel Setup - programming
View all URC MX-350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
The MX-350 5 Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen. Don't worry about the number of steps. Each macro button can store up to 190 steps, so you are not likely to run out of steps! Note: You can program delays in between commands by pressing the PAUSE button. Each press adds half a second to the delay. 6 Press the LIGHT button to end your macro. A new screen displays three choices: SAVE Button SAVE - If you are happy with your macro, press the SAVE button. UNDO - The UNDO button lets you erase the last step. EXIT - The EXIT button erases all the macro steps. 7 Press the MAIN button twice to return to normal operation. 20 Universal Remote Control, Inc. Favorite Channel Setup Imagine surfing all your favorite channels, without ever typing in a channel number. By simply setting up each of the favorite channel buttons, you can make TV, cable or satellite operation fun and easy. To setup a Favorite Channel button, follow these steps: 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 Press the FAV display button. FAV Button The top of the display will show "FAV". The bottom of the display will flash "SELECT". 3 Use the Page buttons until you can see the name (i.e., ABC, CBS, NBC) of the favorite channel you wish to setup. 4 Press the favorite channel button you wish to setup. The top of the screen changes to show the channel name. The bottom of the screen displays "STEP0", indicating that you have not entered the channel number yet. 5 Press either the TV, SAT or CABLE Device button (select the device you use to enter channel numbers). 6 Press each of the number buttons for the channel. Note: Some brands of television require an ENT(Enter) command after the channel numbers. 21