Thermador MEDS301WS Instruction manual - Page 16

Cleaning the Accessories, Adjust Basic Settings

Page 16 highlights

1. Fill the water tank. 2. Press the ON l OFF touch button to switch on the appliance. 3. The oven will calibrate automatically after running a Steam heating mode at 212° F (100 °C) for 30 minutes. Set the heating mode, temperature and duration for the calibration. Press START to begin the appliance operation. Calibration Heating mode Temperature Duration Steam‹ 212° F (100 °C) 30 minutes 4. After calibration, allow the appliance to cool down. 5. Dry the oven cavity bottom floor. 6. Set Bake to 475° F (245°C). Heating up Heating mode Temperature Cooking time Bake ƒ 475° F (245 °C) 30 minutes 7. Keep the kitchen ventilated while the appliance is heating. 8. Stop the appliance operation after the indicated duration. Use the ON l OFF touch button to switch off the appliance. 9. Wait until the oven cavity has cooled down. 10.Clean the smooth surfaces with soapy water and a dish cloth. 11.Empty the water tank and dry the oven cavity. Note: The appliance saves the calibration settings, even in the event of a power outage or disconnection from the power supply. The calibration does not need to be repeated. Cleaning the Accessories Clean the accessories thoroughly using soapy water and a dish cloth or soft brush. Adjust Basic Settings You can adjust various settings of your appliance, to make using your appliance easy and convenient. If necessary, you can change these settings in the menu "Settings". Changing the Settings 1. Touch the ON l OFF touch button. 2. Touch the MENU touch button. 3. Swipe to the left or right to select "Settings 4". 4. Touch "Continue". 5. Swipe to the left or right to select the desired setting. 6. Touch the bottom touch field. 7. Swipe to the left or right to select the desired setting. 8. Touch the 8 icon (where applicable) to apply the setting. 9. Touch the MENU touch button. 10.Touch "Save" to save the changes. Available Settings Setting Option Time of day Time in hours and minutes Language English, Français, Español Clock format 12 hr, 24 hr Clock display Digital, Analogue Temperature format Fahrenheit (°), Celsius (°C) Weight format Pound (lb), Kilogram (kg) Water hardness 0 (softened) 1 (soft) 2 (medium) 3 (hard) 4 (very hard) Signal volume 1 - 5 Key press sound On, Off Display brightness 1 - 5 Standby mode On, Off Start-up animation On, Off Convection Conversion On, Off Decreases oven temperature by 25° F (4 °C) Temperature offset ▯ Temp offset: Upper -35°F to +35° F (-20 °C to +20 °C) ▯ Temp offset: Lower -35°F to +35° F (-20 °C to +20 °C) Sabbath mode On, Off Home Connect WiFi: On, Off Remote control: On, Off Disconnect from network Connect to app Show network status Customer Service access: ▯ Allow (Display shows t) ▯ Deny Demo mode On, Off Factory settings Restore Customer Service -------- Displays Customer Service contact information 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

16
1.
Fill the water tank.
2.
Press the ON l OFF touch button to switch on the
appliance.
3.
The oven will calibrate automatically after running a
Steam heating mode at 212° F (100 °C) for
30 minutes. Set the heating mode, temperature and
duration for the calibration. Press START to begin the
appliance operation.
4.
After calibration, allow the appliance to cool down.
5.
Dry the oven cavity bottom floor.
6.
Set Bake to 475° F (245°C).
7.
Keep the kitchen ventilated while the appliance is
heating.
8.
Stop the appliance operation after the indicated
duration. Use the ON l OFF touch button to switch off
the appliance.
9.
Wait until the oven cavity has cooled down.
10.
Clean the smooth surfaces with soapy water and a
dish cloth.
11.
Empty the water tank and dry the oven cavity.
Note:
The appliance saves the calibration settings, even
in the event of a power outage or disconnection from the
power supply. The calibration does not need to be
repeated.
Cleaning the Accessories
Clean the accessories thoroughly using soapy water and
a dish cloth or soft brush.
Adjust Basic Settings
You can adjust various settings of your appliance, to
make using your appliance easy and convenient. If
necessary, you can change these settings in the menu
“Settings”.
Changing the Settings
1.
Touch the ON l OFF touch button.
2.
Touch the MENU touch button.
3.
Swipe to the left or right to select "Settings
4
".
4.
Touch “Continue”.
5.
Swipe to the left or right to select the desired setting.
6.
Touch the bottom touch field.
7.
Swipe to the left or right to select the desired setting.
8.
Touch the
8
icon (where applicable) to apply the
setting.
9.
Touch the MENU touch button.
10.
Touch "Save" to save the changes.
Available Settings
--------
Calibration
Heating mode
Steam
Temperature
212° F (100 °C)
Duration
30 minutes
Heating up
Heating mode
Bake
ƒ
Temperature
475° F (245 °C)
Cooking time
30 minutes
Setting
Option
Time of day
Time in hours and minutes
Language
English, Français, Español
Clock format
12 hr, 24 hr
Clock display
Digital, Analogue
Temperature
format
Fahrenheit (°), Celsius (°C)
Weight format
Pound (lb), Kilogram (kg)
Water hardness
0 (softened)
1 (soft)
2 (medium)
3 (hard)
4 (very hard)
Signal volume
1 - 5
Key press sound
On, Off
Display
brightness
1 - 5
Standby mode
On, Off
Start-up
animation
On, Off
Convection
Conversion
On, Off
Decreases oven temperature by
25° F (4 °C)
Temperature
offset
Temp offset: Upper
-35°F to +35° F
(-20 °C to +20 °C)
Temp offset: Lower
-35°F to +35° F
(-20 °C to +20 °C)
Sabbath mode
On, Off
Home Connect
WiFi: On, Off
Remote control: On, Off
Disconnect from network
Connect to app
Show network status
Customer Service access:
Allow (Display shows
t
)
Deny
Demo mode
On, Off
Factory settings
Restore
Customer
Service
Displays Customer Service contact
information