Roku HD110 User Guide - Page 96
Shell commands, Example shell commands: playing files and changing settings, HD410, and HD1010
View all Roku HD110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
• HD410, HD810, and HD1010 • 115200 baud • 8 data bits • No parity • 1 stop bit • NO flow control • TTY mode enabled 4 Create a CF/SD card with some test files on it (BMP graphics, 48 kHz MP3 files, MPEG-2 video, etc), and then insert the card into the BrightSign unit you connected to your PC. 5 Connect speakers and/or a monitor to BrightSign. 6 Turn on your BrightSign. 7 After a few moments you should see the BrightSign shell appear. It should also show you the software version number. NOTE: The current version of BrightSign software does not support hot-swapping of CF/SD cards. You must insert the CF/SD card before applying power. Shell commands With the shell running, you can view a list of shell commands by typing: help . Type the command on a line by itself for more information on a particular command. Example shell commands: playing files and changing settings For a Directory of the cards contents use: dir To show the contents of a sub-directory named images, use: dir images 90 • •