Ricoh SP C352DN User Guide - Page 70
No toner. Replace Toner, Interface Units, Operating
View all Ricoh SP C352DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3. Troubleshooting Message Cause Solution "Hardware Problem: Wireless Card" (A "wireless LAN interface board" is referred to as a "wireless card".) The wireless LAN interface board can be accessed, but an error was detected. • Turn off the main power switch, and then confirm the wireless LAN interface board is inserted correctly. For details about installing the board, see "Installing the Interface Units", Operating Instructions. • If the message appears again, contact your service representative. "Load ppr blw in (Tray name)." The printer driver settings are incorrect or the tray does not contain paper of the size selected in the printer driver. Check that the printer driver settings are correct, and then load paper of the size selected in the printer driver into the input tray. For details about how to change the paper size, see page 33 "Loading Paper". "No toner. Replace Toner Cartridge." The toner has run out. Replace the print cartridge. For details, see "Replacing the Print Cartridge", Operating Instructions. "No color toner. Color toner is required to print in black & white with the current paper type. Replace the color Print Cartridge or press [Job Reset] to cancel printing." The color toner has run out. Replace the print cartridge. For details, see "Replacing the Print Cartridge", Operating Instructions. "n ppr siz msmtch Select new tray or use ppr size below." ("n" is a tray name.) The size of the paper in the tray does not match the paper size specified in the printer driver. Select a tray containing paper that is the same size as the specified paper size. "Printer font error." An error has occurred in the font Contact your service settings. representative. 68