Ricoh SP C352DN User Guide - Page 69
Installing the Hard Disk, Hardware Problem: HDD
View all Ricoh SP C352DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
When Messages Are Displayed Message Cause Solution "Hardware Problem: HDD" An error has occurred in the hard disk. • Turn the main power switch off and then back on again. If the message appears again, contact your service representative. • The hard disk may have not been installed properly if you have installed it yourself. Check that it is properly installed For details about installing the unit, see "Installing the Hard Disk", Operating Instructions. "Hardware Problem: Parallel I/F" An error has occurred in the IEEE 1284 interface board. • Turn the main power switch off and then confirm the IEEE 1284 interface board is inserted correctly. For details about installing the board, see "Installing the Interface Units", Operating Instructions. • If the message appears again, contact your service representative. "Hardware Problem: USB" An error has occurred in the USB interface. Turn the main power switch off and then back on again. If the message appears again, contact your service representative. 67