Panasonic AJ-PX800G Basic Operating Instructions - Page 122

Chapter 6 Menu Operations - Menu list Item [SKIN TONE DTL C] [SKIN TONE ZEBRA] [SKIN TONE DTL SETTING] [DETECT TABLE] [SKIN TONE GET] [SKIN DTL EFFECT] [I CENTER] [I WIDTH] [Q WIDTH] [Q PHASE] [RB GAIN CONTROL SETTING] [R GAIN AWB PRE] [B GAIN AWB PRE] [R GAIN AWB A] [B GAIN AWB A] [R GAIN AWB B] [B GAIN AWB B] [AWB A GAIN OFFSET] [AWB B GAIN OFFSET] [COLOR TEMP Ach SETTING] [COLOR TEMP] [R Gain] Description of settings Selects the skin tone table that will display the skin tone detail. Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the skin tone detail. [SKIN TONE DTL C] can be used alone or used in combination with [SKIN TONE DTL A] and [SKIN TONE DTL B]. [ON], [OFF] ffFactory setting: [OFF] Set to display a zebra pattern in the skin tone area displayed in the viewfinder. The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL A]/[SKIN TONE DTL B]/ [SKIN TONE DTL C] is activated. The zebra pattern displays the area selected in [SKIN TONE DTL SETTING]. [ON], [OFF] ffFactory setting: [ON] Selects the skin tone table of the subject that displays the skin tone detail. [A], [B], [C] ffFactory setting: [A] Obtains the color information of [A], [B], or [C] selected in [DETECT TABLE] from near the center marker. If executed, data from [I CENTER] to [Q PHASE] are automatically obtained. The obtained data becomes the table data of [A], [B], or [C] selected in [DETECT TABLE]. Multiple color information for [A], [B], and [C] cannot be obtained simultaneously. Sets the effective level of the skin tone detail. [0]...[31] ffFactory setting: [16] Sets the center position of the upper I axis (setting the area that displays the skin tone). [0]...[255] ffFactory setting: [35] Sets the width of the area that displays the skin tone of the upper I axis that focus on [I CENTER]. [0]...[255] ffFactory setting: [55] Sets the width of the area that displays the skin tone of the upper Q axis that focus on [I CENTER]. [0]...[90] ffFactory setting: [10] Sets the phase of the area that displays the skin tone regarding to the Q axis. [−180]...[179] ffFactory setting: [0] Sets the Rch gain when the switch is on . [−200]...[200] ffFactory setting: [0] Sets the Bch gain when the switch is on . [−200]...[200] ffFactory setting: [0] Sets the Rch gain when the switch is on . [−200]...[200] ffFactory setting: [0] Sets the Bch gain when the switch is on . [−200]...[200] ffFactory setting: [0] Sets the Rch gain when the switch is on . [−200]...[200] ffFactory setting: [0] Sets the Bch gain when the switch is on . [−200]...[200] ffFactory setting: [0] Sets the Rch gain and Bch gain when performing automatic white balance after the switch is on . [ON]: Keeps the values set in [R GAIN AWB A] and [B GAIN AWB A]. [OFF]: Sets the value of Rch gain and Bch gain to [0]. ffFactory setting: [OFF] Sets the Rch gain and Bch gain when performing automatic white balance after the switch is on . [ON]: Keeps the values set in [R GAIN AWB B] and [B GAIN AWB B]. [OFF]: Sets the value of Rch gain and Bch gain to [0]. ffFactory setting: [OFF] Displays the color temperature when the switch is at the position and automatic white balance is working, or when it is preset. Also, in automatic white balance operation, the color temperature can be changed by changing the output balance of Rch and Bch. [2000K]...[15000K] ffFactory setting: [3200K] Displays the Rch output when the switch is at the position and automatic white balance is working, or when it is preset. Also, in automatic white balance operation, the color can be changed on the Rch axis by changing the output of Rch. [−400]...[400] ffFactory setting: [0] - 122 -