LiftMaster CAPXLV2 Installation Manual - English French Spanish - Page 23
Postal Lock, The postal lock switch is wired from the factory.
View all LiftMaster CAPXLV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
INTRODUCTION ACCOUNT SETUP POWER NETWORK/MOUNTING ACCESS CONTROL Postal Lock 1. Remove the wing nut and plug. Discard the wing nut and plug. 2. Remove 4 mounting nuts from studs. 3. Install postal lock using 4 nuts from step 2. 4. Cut the factory installed wire tie from the postal lock switch. The postal lock switch is wired from the factory. NOTE: The postal lock cable length shall not exceed 98.5 ft (30 m). Postal Lock 23
23
Postal Lock
INTRODUCTION
ACCOUNT SETUP
NETWORK/MOUNTING
POWER
ACCESS CONTROL
1.
Remove the wing nut and plug. Discard the wing nut and plug.
2.
Remove 4 mounting nuts from studs.
3.
Install postal lock using 4 nuts from step 2.
4.
Cut the factory installed wire tie from the postal lock switch.
The postal lock switch is wired from the factory.
NOTE:
The postal lock cable length shall not exceed 98.5 ft (30 m).
Postal Lock