LiftMaster CAPXLV Installation Manual - English French Spanish - Page 24

INTRODUCTION PRE-INSTALL INSTALL NETWORK ACCESS CONTROL Upgrade CAPXL with CAPXLCAM NOTE: CAPXLCAM is the only USB camera supported by CAPXL and myQ® Business™ video features. CAPXLCAM is the only camera evaluated by UL for use with CAPXL. PRIOR TO CAMERA INSTALLATION 1. Make note of all Internet connectivity settings before any firmware update. When updating firmware Internet settings will be deleted. Go to the CAPXL connection screen in admin mode and write down or take picture of settings. 2. Ensure CAPXL is running Firmware version 2.0 or higher. Warning: The CAPXL upgrade process requires a restart and could be non-functional for up to 30 minutes while this upgrade takes place. Please ensure the gates/doors are open or residents have an alternate means to enter to the community during this brief period prior to hitting the upgrade button in myQ® Business™. This may require a technician on site to ensure safe operation and resident flow. 3. Login to myQ®Business™ to update the CAPXL to the latest firmware version.Turn off power by disconnecting the power input on the I/O board. 4. Remove the protective LENS cover from the camera assembly lens. NOTE: Camera lens cover must be removed prior to mounting in the CAPXL. Recommended Tools • Network Test Software • Wi-Fi / Wi-Fi Hotspot • Philips Screwdriver • Wi-Fi Analyzer App • Network LAN Cable Tester • Pliers Installation 1. Open CAPXL and remove the existing black camera bracket (top middle) by loosening and removing the wingnut. 2. Ensure CAPXL camera window is clean and free of any obstructions. Cleaning the camera window with a clean lens wipe or lens cloth is recommended. Carton Inventory • Camera assembly • Camera bracket • USB cable • Mounting hardware bag (2x Screws) 3. Remove all items from shipping carton and ensure all required items are present: camera assembly, camera bracket, USB cable, and mounting hardware bag. 4. Use the mounting hardware to attach the new bracket with camera to the CAPXL. Securely tighten. 5. Use pliers to unplug the upper right dummy plug from USB socket on control board (controller). (Figure 1.A) 6. USB Port #3 must be used to connect the camera. The Micro USB end of the USB cable goes into the camera and the standard USB end of the cable specifically connects to USB port #3, (the upper right USB port on the controller.) (See Figure 1.B) Top Bottom Top Right USB Port #3 1. A 1. B Figure 1. Removing the dummy USB and connecting to USB Port #3 on the upper right side of the controller. 7. Route and secure USB cable with included tie-wraps. (Figure 2) 8. Turn on power to the CAPXL. 9. Enter CAPXL Admin Mode using the #1 dip switch. Select the "Audio / Video" tab and confirm the video feed appears, the angle and orientation is correct. (Figure 3) 10. Refer to the myQ® Business™ Quickstart Guide and visit the help section of the myQ® Business™ website for tutorial videos and futher assistance with setting up the camera functions. Features such as the recording of events, the Guest View Feature, and more are set up within the myQ® Business™ account. Figure 2. Routing the USB cable. Access your myQ® Business™ account at: https://www.myQBusiness.com Dip Switch #1 on the Power / Internet board enters Admin Mode. myQ® Business™ Help and Tutorial Videos: https://www.myQBusiness.com/Help ON ON NOTE: Options such as live streaming within myQ® Business™ are included with an access control subscription. 1 2 3 4 Figure 3. Admin Mode. NOTE: Please refer to the specific jurisdiction to determine if specific signage will be required for video use and monitoring. 24