LiftMaster CAPXLV Installation Manual - English French Spanish - Page 12
INSTALL, 1 Remove Knockouts, Electrical Wiring
View all LiftMaster CAPXLV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INTRODUCTION PRE-INSTALL INSTALL NETWORK ACCESS CONTROL 1 Remove Knockouts 1. Turn the key clockwise to unlock the CAPXL / CAPXLV. 2. Open the door and lay the CAPXL / CAPXLV face down on a table with the door hanging off the edge of the table as shown. 3. Identify which knockouts need to be removed based on your application. 4. Use a center punch tool to remove the knockouts from the outside of the box inward using an appropriately sized punch and hammer. NOTE: Be careful when removing the knockouts to avoid damaging the CAPXL / CAPXLV components. To prevent damage to the CAPXL / CAPXLV from moisture or water: • DO NOT install during rain. Internal components MUST be kept free from of water and moisture. • BEFORE opening the front cover of the CAPXL / CAPXLV, remove ANY accumulated water from the top of the CAPXL / CAPXLV. To prevent damage to ANY internal components: • DO NOT attempt to remove the knockouts with a hammer. Banging on the knockouts may result in shock to the circuit boards, which could cause permanent damage. W S R S W R W P P S E P P R R E = Electrical Wiring P = Pedestal Mount R = Recess Mount S = Security+ 2.0® Radio Antenna W = Wi-Fi® Antenna E E E 12