AEG AXP26U558HW User Manual - Page 19
Fault code, 4 Drainage instruction
View all AEG AXP26U558HW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
To cancel the setting, press the "timer" button again. 7.3 Fault code If the display reads "AS", "CS" and "ES", the temperature sensor has failed. Contact your Authorized AEG Service Center. ENGLISH 19 7.4 Drainage instruction Continuous Drainage During the DRY mode or heat pump model, you will need a garden hose (sold separately) or drain hose to drain the condensate from the unit. Follow the steps below: • Unscrew the drain cap of continuous drain outlet(Fig.20). • Connect one end of the garden hose (sold separately) or drain hose to the drain outlet then lead the other end into a drain that is lower than the unit(Fig.21). Fig. 20 Drain cap for Dry mode Drain cap for Heat Pump mode If the display reads "L3", the condenser DC fan motor has failed. Contact your Authorized AEG Service Center. Garden hose Drain hose If the display reads "P1", bottom tray is full. Carefully move the unit to a drain location, remove the bottom drain plug and let the water drain away. Restart the machine until the "P1" symbol disappears. If error repeats, call for service. If the display reads "E4", the communication between display PCB and main control PCB is faulty. Contact your Authorized AEG Service Center. Fig. 21 NOTE: • the drain cap, if the unit is running in Cool or Auto mode. When you want to remove the garden hose, prepare a drip tray (not supplied) to collect the condensate from the drain outlet. • Please be sure that the height of the drain and section of the drain hose should not be higher than that of the drain outlet, or the continous drainage may not work properly. • During Cool or Auto mode, it is recommended to disable continuous drainage by replacing the drain cap to the drain outlet, to reach the maximum performance.