2010 Yamaha Motorsports Phazer R-TX Owners Manual - Page 69

2010 Yamaha Motorsports Phazer R-TX Manual

Get 2010 Yamaha Motorsports Phazer R-TX PDF manuals and user guides View all 2010 Yamaha Motorsports Phazer R-TX manuals

Page 69 highlights

Periodic maintenance and adjustment 1 1. Secondary sliding sheave 2. Secondary fixed sheave 1. Dipstick 4. 9. Install the V-belt between the secondary fixed sheave and the secondary sliding sheave. Remove the dipstick and check that the oil level is within the range shown at the bottom of the dipstick. If the oil does not reach the bottom of the dipstick, add sufficient oil of the recommended type to raise it to the correct level. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 1. V-belt 10. Install the drive guard. 11. Install the left side cover (PZ50RT / PZ50GT / PZ50MT), or install the left side cover and the left upper cover, and then close the shroud (PZ50VT). ESU12125 1. Oil level range Drive chain housing To check the drive chain housing oil level 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the right side cover. (See page 48 for removal procedures.) 3. Remove the dipstick, wipe it off with a clean rag, and then insert it back into the filler hole. Recommended drive chain oil: SAE 75W or 80W API GL-3 Gear oil 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Periodic maintenance and adjustment
63
9.
Install the V-belt between the secondary
fixed sheave and the secondary sliding
sheave.
10.
Install the drive guard.
11. Install the left side cover (PZ50RT /
PZ50GT / PZ50MT), or install the left side
cover and the left upper cover, and then
close the shroud (PZ50VT).
ESU12125
Drive chain housing
To check the drive chain housing oil level
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Remove the right side cover. (See page
48 for removal procedures.)
3.
Remove the dipstick, wipe it off with a
clean rag, and then insert it back into the
filler hole.
4.
Remove the dipstick and check that the
oil level is within the range shown at the
bottom of the dipstick. If the oil does not
reach the bottom of the dipstick, add suf-
ficient oil of the recommended type to
raise it to the correct level.
NOTICE:
Make sure that no foreign material en-
ters the drive chain housing.
[ECS00531]
1.
Secondary sliding sheave
2.
Secondary fixed sheave
1. V-belt
1. Dipstick
1.
Oil level range
Recommended drive chain oil:
SAE 75W or 80W API GL-3 Gear oil
1