2010 Yamaha Motorsports Phazer R-TX Owners Manual - Page 57

2010 Yamaha Motorsports Phazer R-TX Manual

Get 2010 Yamaha Motorsports Phazer R-TX PDF manuals and user guides View all 2010 Yamaha Motorsports Phazer R-TX manuals

Page 57 highlights

Periodic maintenance and adjustment 2. Remove the right upper cover by removing bolts A and bolt B. 3 2 1. Right upper cover bolt A 2. Right upper cover bolt B 3. Right upper cover 1. Fastener 2. Left upper cover 3. Right upper cover To install the right upper cover 1. Place the right upper cover in the original position, and then install and tighten bolts A and bolt B to their specified torques. Tightening torques: Right upper cover bolt A: 8 Nm (0.8 m·kgf, 5.8 ft·lbf) Right upper cover bolt B: 3 Nm (0.3 m·kgf, 2.2 ft·lbf) 2. Install the top cover. To install an upper cover 1. Insert the projections on the upper cover into the slots, fit the holders on the cover onto the grommets, and then tighten the fasteners. Left and right upper covers (PZ50VT) To remove an upper cover 1. Open the shroud. (See the above procedure.) 2. Loosen the fasteners, and then remove the upper cover. 1. Projection 2. Holder 1. Slot 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Periodic maintenance and adjustment
51
2.
Remove the right upper cover by remov-
ing bolts A and bolt B.
To install the right upper cover
1.
Place the right upper cover in the original
position, and then install and tighten bolts
A and bolt B to their specified torques.
2.
Install the top cover.
Left and right upper covers (PZ50VT)
To remove an upper cover
1.
Open the shroud. (See the above proce-
dure.)
2.
Loosen the fasteners, and then remove
the upper cover.
To install an upper cover
1.
Insert the projections on the upper cover
into the slots, fit the holders on the cover
onto the grommets, and then tighten the
fasteners.
1.
Right upper cover bolt A
2.
Right upper cover bolt B
3.
Right upper cover
Tightening torques:
Right upper cover bolt A:
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
Right upper cover bolt B:
3 Nm (0.3 m·kgf, 2.2 ft·lbf)
2
3
1. Fastener
2.
Left upper cover
3.
Right upper cover
1. Projection
2. Holder
1. Slot