2010 Yamaha Motorsports Phazer R-TX Owners Manual - Page 58

Periodic maintenance and adjustment You should periodically remove and inspect the spark plug because heat and deposits will cause a spark plug to slowly break down and erode. Consult a Yamaha dealer before changing to a different type of spark plug. Specified spark plug: Manufacturer: NGK Model: CR9EKB 1. Grommet 2. Close the shroud. EWS00710 ECS00371 WARNING Be sure to use the specified spark plug and spark plug cap. Otherwise, the T.O.R.S. may not work properly. Spark plugs are produced in several different thread lengths. The thread length or reach is the distance from the spark plug gasket seat to the end of the threaded portion. If the reach is too long, overheating and engine damage may result. If the reach is too short, spark plug fouling and poor performance may result. Also, if the reach is too short, carbon will form on the exposed threads resulting in combustion chamber hot spots and thread damage. Always use a spark plug with the specified reach. Spark plug reach: 19.0 mm (0.75 in) NOTICE G G Make sure that all cables, leads, etc., are routed properly before installing the shroud and covers. When installing the shroud and covers, be sure to tighten the fasteners securely. ESU11782 Checking the spark plugs The spark plug is an important engine component and is easy to inspect. The condition of the spark plug can indicate the condition of the engine. Check the coloration on the white porcelain insulator around the center electrode. The ideal coloration at this point is a medium to a light tan color for a snowmobile that is being ridden normally. If a spark plug shows a distinctly different color, there could be something wrong with the engine. For example, a very white center electrode porcelain color could indicate an intake track air leak or carburetion problem for that cylinder. Do not attempt to diagnose such problems yourself. Instead, take the snowmobile to a Yamaha dealer for inspection and possible repairs. 52