2010 Yamaha Motorsports Phazer R-TX Owners Manual - Page 22
2010 Yamaha Motorsports Phazer R-TX Manual
Page 22 highlights
Control functions play. Note the error code, and then have a Yamaha dealer inspect the snowmobile as soon as possible. NOTICE: Do not continue to operate the engine longer than necessary if there is an error code to avoid possible engine damage. [ECS00820] ECS00052 NOTICE Do not use the drive select switch while the snowmobile is moving. Otherwise, the drive train could be damaged. ESU10531 Engine stop switch " " 3 2 The engine stop switch is used to stop the engine in an emergency. Simply push the stop switch to stop the engine. To start the engine, pull the stop switch and proceed with starting the engine. (See page 35 for engine starting procedures.) 1. Warning light " " 2. Self-diagnosis warning indicator " 3. Error code display ESU10544 " Drive select switch The drive select switch is used to shift the snowmobile into drive or reverse. After coming to a complete stop, press the drive select switch. The drive "D" indicator light comes on when the transmission is in drive (forward). The reverse "R" indicator light comes on when the transmission is in reverse. 1. Engine stop switch " " During the first few rides, practice using the stop switch so that you can react quickly in an emergency. ESU10661 Headlight beam switch "LIGHTS" Push the headlight beam switch to change the headlight to high beam "HI" or to low beam "LO". 1. Drive select switch 2. Drive "D" indicator light 3. Reverse "R" indicator light 16