2010 Yamaha Motorsports Apex LTX GT Owners Manual - Page 72
2010 Yamaha Motorsports Apex LTX GT Manual
Page 72 highlights
Periodic maintenance and adjustment Shifted to left 1 3 1. Left adjusting bolt 2. Right adjusting bolt 3. Locknut 3 2 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Shifted to right 5. Adjust the drive track deflection to specification. NOTICE: The right and left adjusting bolts should be turned an equal amount. [ECS00970] Drive track deflection More than specified Turn in Turn in Less than specified Turn out Turn out Left adjusting bolt 1. 2. 3. 4. 5. Forward Gap Slide runner Drive track Slide metal Right adjusting bolt 6. Tighten the locknuts to their specified torque. Locknut tightening torque: 59 Nm (5.9 m·kgf, 43 ft·lbf) 7. 8. 9. Recheck alignment and deflection. If necessary, repeat steps 3 to 6 until the proper adjustment is achieved. Lower the snowmobile to the ground. Tighten the rear axle nut. Rear axle nut tightening torque: 75 Nm (7.5 m·kgf, 54 ft·lbf) Slide runners Check the slide runners for wear and damage. 66
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67 -
68 -
69 -
70 -
71 -
72 -
73 -
74 -
75 -
76 -
77 -
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
 |
 |
