2010 Yamaha Motorsports Apex LTX GT Owners Manual - Page 24
2010 Yamaha Motorsports Apex LTX GT Manual
Page 24 highlights
Control functions ESU10661 Headlight beam switch "LIGHTS" Push the headlight beam switch to change the headlight to high beam "HI" or to low beam "LO". 1. Thumb warmer adjustment switch ESU13670 Auxiliary DC jack The auxiliary DC jack is located in the front panel and can be used for accessories. 1. Headlight beam switch "LIGHTS" 2. High beam "HI" 3. Low beam "LO" ESU12711 TIP The auxiliary DC jack cannot be used if the engine is not running. To use the auxiliary DC jack 1. Start the engine. 2. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. Grip warmer/rear shock absorber compression damping and thumb warmer adjustment switches These switches are used to adjust the grip warmer, rear shock absorber compression damping and thumb warmer levels. See "Fuel meter, grip warmer level indicator, rear shock absorber compression damping level indicator, and thumb warmer level indicator" on page 13 for detailed information. 1. Auxiliary DC jack cap 2. Auxiliary DC jack 3. After using the auxiliary DC jack, be sure to remove the accessory power plug from the jack and to close the auxiliary DC jack cap. 1. Grip warmer/rear shock absorber compression damping adjustment switch 18