2008 Yamaha Motorsports Phazer GT Owners Manual - Page 51
2008 Yamaha Motorsports Phazer GT Manual
Page 51 highlights
Periodic maintenance ESU13000 ESU11761 Tool kit The owner's tool kit has the tools which are sufficient for most periodic maintenance and minor repairs. A torque wrench is also necessary to properly tighten nuts and bolts. Removing and installing the shroud and covers Shroud, front cover, and air filter case cover To open the shroud and remove the front cover and air filter case cover 1. Unhook the latch, and then slide the front cover upward (PZ50RT / PZ50GT / PZ50MT). Unhook the shroud latches, and then slowly raise the shroud forward until it stops (PZ50VT). 2. Loosen the fasteners, lift up the air filter case cover slightly, and then unhook the cover from the air filter case to remove it. PZ50RT / PZ50GT / PZ50MT 1. Tool kit ECS00780 CAUTION: Before starting the engine, make sure that the tool kit is securely fastened(PZ50RT / PZ50GT / PZ50MT) and that the storage pouch zipper is completely closed. NOTE: If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. 1. 2. 3. 4. Latch Front cover Air filter case cover Fastener PZ50VT 1. Shroud latch 2. Shroud 45