2008 Yamaha Motorsports Phazer GT Owners Manual - Page 36

2008 Yamaha Motorsports Phazer GT Manual

Get 2008 Yamaha Motorsports Phazer GT PDF manuals and user guides View all 2008 Yamaha Motorsports Phazer GT manuals

Page 36 highlights

Control functions 2. Turn the control rod adjusting nut in direction (a) to increase weight transfer or direction (b) to decrease weight transfer. 1. Red paint area 2. Adjustable range 3. Standard position 3. Tighten the locknut while holding the control rod adjusting nut in place. Locknut tightening torque: 25 Nm (2.5 m·kgf, 18 ft·lb) ECS00310 CAUTION: G 1. Locknut 2. Control rod adjusting nut EWS00170 WARNING Never adjust the control rods beyond the maximum range indicated on the rods with red paint. G When using the two wrenches included in the owner's tool kit, make sure that they are situated at a right angle to the control rod as shown, and that they are tightly fitted to the locknut and the control rod adjusting nut. The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Control functions
30
2.
Turn the control rod adjusting nut in direc-
tion (a) to increase weight transfer or di-
rection (b) to decrease weight transfer.
WARNING
EWS00170
Never adjust the control rods beyond the
maximum range indicated on the rods with
red paint.
3.
Tighten the locknut while holding the con-
trol rod adjusting nut in place.
CAUTION:
ECS00310
●
When using the two wrenches included
in the owner’s tool kit, make sure that
they are situated at a right angle to the
control rod as shown, and that they are
tightly fitted to the locknut and the con-
trol rod adjusting nut.
●
The left and right adjusting nuts must be
set to the same position. Uneven set-
tings can cause poor handling and loss
of stability.
1. Locknut
2.
Control rod adjusting nut
1.
Red paint area
2.
Adjustable range
3.
Standard position
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lb)