2010 Mercedes ML-Class Owner's Manual - Page 94
2010 Mercedes ML-Class Manual
Page 94 highlights
92 Lighting Memory function Notes With the memory function you can store up to three different configurations per front seat. Each memory position button on the driver's side can store all of the following settings: RSeat Recalling positions from memory X Press and hold desired memory position button 1, 2 or 3 until the seat has moved to the stored position completely. On the driver's side, also wait for the steering wheel and exterior rear view mirrors to move to the stored position. Controls in detail position wheel position rear view mirrors' position RSteering RExterior i Releasing the memory position button stops movement to the stored positions immediately. Lighting Notes i If you drive in countries with left-hand driving, you must have the headlamps modified for symmetrical low beams. Relevant information can be obtained at any authorized Mercedes-Benz Center. i Vehicles equipped with active Bi-Xenon headlamps: The active Bi-Xenon headlamps increase usable illumination over conventional headlamps because they follow the curvature of the road ahead. The beams of the active Bi-Xenon headlamps shift to either side according to the vehicle's steering angle and speed. G Warning! Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle. Each memory position button on the front passenger side can store the setting of the seat position. Storing positions into memory X X Adjust the seats. On the driver's side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1, 2 or 3. When the settings are stored to the selected position, an acknowledgement signal sounds.