2010 Mercedes ML-Class Owner's Manual - Page 131
2010 Mercedes ML-Class Manual
Page 131 highlights
Control system Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. With KEYLESS-GO, the number of messages will reappear when you turn off the engine by pressing the KEYLESS-GO start/stop button and open the driver's door. Except for high-priority messages, the vehicle status message memory will be cleared when you switch off the ignition. The following message appears in the multifunction display: Settings Cannot be completely reset to factory settings when engine is running. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. 129 Settings menu Introduction In the Settings menu there are two functions: The function To reset, press reset button for 3 seconds, with which you can reset all the settings to the original factory settings and a collection of submenus with which you can make individual settings for your vehicle. The following settings and submenus are available in the Settings menu: RResetting to factory settings (Y page 129) RSubmenus X Press the reset button in the instrument cluster (Y page 117) for approximately 3 seconds. The request to press the reset button once more to confirm appears in the multifunction display. in the Settings menu (Y page 130) cluster submenu (Y page 130) submenu (Y page 132) submenu (Y page 133) submenu (Y page 135) RInstrument X RTime/Date RLighting RVehicle submenu (Y page 135) Press the reset button once more. The settings you have changed will not be reset unless you confirm the action by pressing the reset button a second time. After approximately 5 seconds, the Settings menu reappears in the multifunction display. RComfort Resetting to factory settings You can reset the settings of all submenus to the factory settings. For safety reasons, the function Lamp Circuit Headlamp in the Lighting submenu cannot be reset while driving. Z Controls in detail