2010 Mercedes ML-Class Owner's Manual - Page 271

Where will I find ...? a wheel change such as a jack or a wheel wrench. Some tools required for a wheel change are specific to your vehicle. Contact an authorized Mercedes-Benz Center to obtain the tools approved for your vehicle. The illustration shows the vehicle retrofitted with the necessary tools for a wheel change. 269 X : Towing eye bolt ; Alignment bolt = Jack ? Fuse chart X Engage securing hook = on upper cargo compartment lip ?. A Electric air pump27 B TIREFIT kit27 C Wheel wrench D Collapsible wheel chock E Reversible ratchet for jack ! With the cargo compartment cover blind installed behind the rear seats, disengage cargo compartment cover blind and flip it forward. Otherwise the strap of the securing hook could damage the cargo compartment cover blind. ! To prevent damage, always disengage the securing hook from upper cargo compartment lip and lower the cargo compartment floor before closing the tailgate. Vehicles without spare wheel i Vehicles without spare wheel are not factory-equipped with the tools required for 27 ML 350 BlueTEC 4MATIC (Canada vehicles) factory equipped with 20" wheels only. Z Practical hints Release securing hook = (located below the floor handle) from holder.