2010 Mercedes ML-Class Owner's Manual - Page 140
2010 Mercedes ML-Class Manual
Page 140 highlights
138 Control system DSR (Downhill Speed Regulation) programmed default speed Use this function to program the default speed the DSR is set to when it is activated. You can program the default speed between 3 - 10 mph (Canada: 4- 18 km/h). The set value is increased in 1 mph (Canada: 2 km/h) increments. X Press button V or U repeatedly until the Vehicle configuration menu appears in the multifunction display. X Press button & or * repeatedly until the message DSR Speed appears in the multifunction display. The selection marker is on the current setting. RResetting RDistance RCurrent fuel consumption statistics (Y page 139) to empty (Y page 139) fuel consumption (Y page 139) Controls in detail When you enter the Trip computer menu, you will always see the fuel consumption statistics since start first. Fuel consumption statistics since start X Press button U or V repeatedly until the message From Start appears in the multifunction display. : Distance driven since start ; Time elapsed since start = Average speed since start X Press button W or X repeatedly until the desired speed is shown in the multifunction display. When DSR is switched on, DSR will use the programmed default speed to regulate the vehicle's speed. Once DSR is switched on, you can adjust the set speed using the cruise control lever (Y page 154). ? Average fuel consumption since start All statistics stored since the last engine start will be reset approximately 4 hours after the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. Resetting will not occur if you turn the SmartKey back to position 1 or 2 within this time period. Trip computer menu Use the Trip computer menu to call up statistical data on your vehicle. The following information is available: RFuel Fuel consumption statistics since last reset X consumption statistics since start (Y page 138) (Y page 138) Press button U or V repeatedly until the message From Start appears in the multifunction display. X Press button & or * repeatedly until the message From Reset appears in the multifunction display. RFuel consumption statistics since last reset