2010 Mercedes ML-Class Owner's Manual - Page 104
2010 Mercedes ML-Class Manual
Page 104 highlights
102 Power windows Closing when a door window is blocked G Warning! Make sure that nobody can become trapped and be seriously or even fatally injured when closing a door window with greater force or without automatic reversal function. X Controls in detail If the upward movement of a door window is blocked during the closing procedure, the door window will stop and open slightly. X Pull and hold switch :, ;, = or ? (Y page 101) until the respective door window is closed. The door window opens again slightly. X Pull and hold the respective switch once more immediately until the door window is closed completely. X Hold the respective switch for approximately 1 second. The door window is synchronized. Immediately after the door window has stopped because it was blocked, pull and hold the respective switch upward until the door window is fully closed. The door window closes with greater force. Summer opening feature When the weather is warm, you can ventilate the vehicle before driving off by simultaneously Ropening Ropening If the door window is blocked again and opens slightly: X the door windows the tilt/sliding sunroof Immediately after the door window was blocked, pull and hold the respective switch upward until the door window is fully closed. The door window closes without automatic reversal function. Rswitching on the seat ventilation for the driver's seat (Canada only) G Warning! Pulling and holding the switch to close the door window immediately after it had been blocked two times will cause the door window to close without any reversal function for as long as you hold the switch. Synchronizing door windows The door windows must be synchronized after the battery has been disconnected or if the door windows cannot be fully closed (express operation). Each door window must be synchronized separately. X Close all doors. X Switch on the ignition. The summer opening feature can only be activated via the remote control of the SmartKey. The SmartKey must be in close proximity to the driver's outside door handle. X Aim the transmitter eye of the SmartKey at the driver's outside door handle. X Press and hold button % on the SmartKey until the door windows and the tilt/sliding sunroof have reached the desired position. The vehicle unlocks. X Release button % on the SmartKey to interrupt the opening procedure. Convenience closing feature When locking the vehicle, you can simultaneously close the door windows and the tilt/sliding sunroof. G Warning! When closing the door windows and the tilt/ sliding sunroof, make sure there is no danger