2010 Mercedes ML-Class Owner's Manual - Page 135

Control system 133 X Press button W or X to set the month, day, or year. Lighting submenu Access the Lighting submenu via the Settings menu. Use the Lighting submenu to change the lamp and lighting settings on your vehicle. The following functions are available: RSwitching RSwitching RParking RTail lamps plate lamps daytime running lamp mode on or off (USA only) (Y page 133) locator lighting on or off (Y page 133) night security illumination on or off (Y page 134) interior lighting delayed shut-off on or off (Y page 135) lamps marker lamps RLicense RSide RSwitching RSwitching Switching daytime running lamp mode on or off (USA only) X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Daytime Running Lamps appears in the multifunction display. The selection marker is on the current setting. For more information on the daytime running lamp mode, see (Y page 94). For safety reasons, changing the setting for the daytime running lamp mode is not possible while the vehicle is in motion. The following message appears in the multifunction display: Settings can only be made with engine off. For safety reasons, resetting all the functions of all submenus to the factory settings while driving (Y page 129) will not deactivate the daytime running lamp mode. Switching locator lighting on or off With the locator lighting feature activated, the exterior lamp switch in position à and the interior lighting in automatic mode, the following lamps will come on during darkness when the vehicle is unlocked using button % on the SmartKey: RParking lamps RTail lamps Z Controls in detail Example illustration for setting the month X Press button W or X to switch the daytime running lamp mode On or Off. With daytime running lamp mode switched on and the exterior lamp switch in position $ or Ã, the low-beam headlamps are switched on when the engine is running. In low ambient light conditions the following lamps will come on additionally: