2010 Mercedes GL-Class Owner's Manual - Page 99

Lighting modified for symmetrical low beams. Relevant information can be obtained at any authorized Mercedes-Benz Center. 97 Storing positions into memory X X Adjust the seats. On the driver's side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1, 2 or 3. When the settings are stored to the selected position, an acknowledgement signal sounds. Exterior lamp switch Recalling positions from memory X 1 W Standing lamps, left 2 X Standing lamps, right 3 $ Off Press and hold desired memory position button 1, 2 or 3 until the seat has moved to the stored position completely. On the driver's side, also wait for the steering wheel and exterior rear view mirrors to move to the stored position. Daytime running lamp mode 4 Ã Automatic headlamp mode Daytime running lamp mode 5 T Parking lamps6 6 L Low-beam headlamps or high-beam i Releasing the memory position button stops movement to the stored positions immediately. Lighting Notes i If you drive in countries with left-hand driving, you must have the headlamps 6 headlamps 7 R Vehicles without front fog lamps: Rear fog lamp 7 N Vehicles with front fog lamps: Front fog lamps 8 R Vehicles with front fog lamps: Rear fog lamp When the parking lamps are on, the tail lamps, the license plate lamps, the side marker lamps, and the instrument cluster illumination are also on. Z Controls in detail i Vehicles equipped with active Bi-Xenon headlamps: The active Bi-Xenon headlamps increase usable illumination over conventional headlamps because they follow the curvature of the road ahead. The beams of the active Bi-Xenon headlamps shift to either side according to the vehicle's steering angle and speed.