2010 Mercedes GL-Class Owner's Manual - Page 109
2010 Mercedes GL-Class Manual
Page 109 highlights
Power windows X 107 Closing: Pull switch A and release. Both hinged quarter windows close completely. Summer opening feature When the weather is warm, you can ventilate the vehicle before driving off by simultaneously Ropening Ropening Ropening the tilt/sliding sunroof Rswitching on the seat ventilation for the driver's seat i For your safety, the hinged quarter windows cannot be opened again until 4 seconds have passed. Synchronizing door windows The door windows must be synchronized after the battery has been disconnected or if the door windows cannot be fully closed (express operation). Each door window must be synchronized separately. X Close all doors. X Switch on the ignition. X Pull and hold switch :, ;, = or ? (Y page 106) until the respective door window is closed. The door window opens again slightly. X Pull and hold the respective switch once more immediately until the door window is closed completely. X Hold the respective switch for approximately 1 second. The door window is synchronized. The summer opening feature can only be activated via the remote control of the SmartKey. The SmartKey must be in close proximity to the driver's outside door handle. X Aim the transmitter eye of the SmartKey at the driver's outside door handle. X Press and hold button % on the SmartKey until the windows and the tilt/ sliding sunroof have reached the desired position. The vehicle unlocks. X Release button % on the SmartKey to interrupt the opening procedure. Convenience closing feature When locking the vehicle, you can simultaneously close Rthe Rthe Rthe door windows hinged quarter windows tilt/sliding sunroof G Warning! When closing the windows and the tilt/sliding sunroof, make sure there is no danger of anyone being harmed by the closing procedure. If potential danger exists, proceed as follows: RRelease button & to stop the closing procedure. To open, press and hold button %. To continue the closing procedure after making sure that there is no danger of Z Controls in detail i When the obstruction sensor detects that a hinged quarter windows is blocked during the closing process, they will stop and open slightly. X Halting closing process: Press or pull switch A once more during the closing process. The hinged quarter windows will stop and open completely. the door windows the hinged quarter windows