2010 Mercedes GL-Class Owner's Manual - Page 118
2010 Mercedes GL-Class Manual
Page 118 highlights
116 Automatic transmission With SmartKey: X Shifting procedure The automatic transmission selects individual gears automatically, depending on Rthe selected gear range (Y page 118) Rthe Rthe Controls in detail Make sure the ignition is switched on. X With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into neutral position N. X Release the brake pedal. X If engaged, release the parking brake. X Switch off the ignition and leave the SmartKey in the starter switch. With KEYLESS-GO: X position of the accelerator pedal vehicle speed With drive position D selected, you can influence transmission shifting by limiting or extending the gear range. Make sure the ignition is switched on. X With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into park position P. X Release the brake pedal. X Remove the KEYLESS-GO start/stop button from the starter switch. X Insert the SmartKey into the starter switch. X Switch on the ignition. X Depress the brake pedal and keep it pressed. X Shift the automatic transmission into neutral position N. X Release the brake pedal. X If engaged, release the parking brake. X Switch off the ignition and leave the SmartKey in the starter switch. Transmission positions The current transmission position appears in the multifunction display. : Transmission position indicator Shifting into reverse gear R X If the current transmission position does not appear in the multifunction display due to a malfunction, for example, make sure that the automatic transmission is in the desired position. X Shift the automatic transmission into drive position D. X Do not limit the gear range. X Drive off carefully. With the vehicle at a standstill, depress the brake pedal. X Move the gear selector lever up past the resistance point. Shifting into drive position D X With the vehicle at a standstill, depress the brake pedal. X Move the gear selector lever down past the resistance point.