2010 Mercedes GL-Class Owner's Manual - Page 142

140 X Control system Move the selection marker with button W or X to the Comfort submenu. X Press button & or * repeatedly until the message Belt Adjustment appears in the multifunction display. The selection marker is on the current setting. Controls in detail X Press button W or X to switch the function On or Off. Vehicle configuration menu Use the Vehicle configuration menu to activate/deactivate the Distance warning function (Y page 140) or to set the DSR speed (Y page 141). X Press button W or X to active (On) or deactivate (Off) the seat belt adjustment feature. Switching fold-in function for exterior rear view mirrors on or off Use this function to set the exterior rear view mirrors to be folded in automatically when you lock your vehicle. With this function set to On and the exterior rear view mirrors folded in using the button on the door control panel (Y page 95), the exterior rear view mirrors will not fold out when you switch on the ignition. You will then have to fold out the exterior rear view mirrors using the button on the door control panel (Y page 95). Make sure both exterior rear view mirrors are folded out completely before driving off. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Comfort submenu. X Press button & or * repeatedly until the message Fold In Mirrors When Locking appears in the multifunction display. The selection marker is on the current setting. Distance warning function In vehicles equipped with Distronic, you can determine whether the distance warning function is to be enabled or disabled. With this function set to On, the system will alert you when recognizing a stationary obstacle or a slower vehicle moving in your vehicle's path and the danger of a collision exists, even when the Distronic is switched off. X Press button V or U repeatedly until the vehicle configuration menu appears in the multifunction display. X Press button & or * repeatedly until the message Distance Warning appears in the multifunction display. The selection marker is on the current setting. X Press button W or X to switch the distance warning function On or Off.