2010 Mercedes GL-Class Owner's Manual - Page 289
2010 Mercedes GL-Class Manual
Page 289 highlights
Vehicle status messages in the multifunction display X 287 Removing: Open the tailgate (Y page 75). X Lift the cargo compartment floor and secure it on the upper cargo compartment lip (Y page 284). X ! To prevent damage, always disengage the securing hook from upper cargo compartment lip and lower the cargo compartment floor before closing the tailgate. X Place the jack into the vehicle tool kit (Y page 285). X Close and pull tight the hook and loop fastener (Y page 285) that secures the jack. Vehicle status messages in the multifunction display Notes Warning and malfunction messages appear in the multifunction display located in the instrument cluster. Certain warning and malfunction messages are accompanied by an audible signal. Address these messages accordingly and follow the additional instructions given in this Operator's Manual. Selecting the Vehicle status message memory menu in the control system (Y page 131) displays both cleared and uncleared messages. High-priority messages appear in the multifunction display in red color. Certain messages of high priority cannot be cleared from the multifunction display using the reset button (Y page 124) or button &, *, U or V on the multifunction steering wheel. Other messages of high priority and messages of less immediate priority can be cleared from the multifunction display using the reset button or button &, *, U or V on the multifunction steering wheel. They are then stored in the Vehicle status message memory menu (Y page 131). Remember that clearing a message will only make the message disappear. Clearing a message will not correct the condition that caused the message to appear. Remove the jack from the vehicle tool kit (Y page 285). X Remove retaining screw : by turning it counterclockwise. i If retaining screw : does not come loose, turn storage well casing = slightly counterclockwise. Retaining screw : should then come loose easily. X Remove storage well casing =. X Remove spare wheel ;. For information on mounting the spare wheel, see "Flat tire" (Y page 336). Storing the spare wheel after use X Place spare wheel ; into the spare wheel well (Y page 287). X Place storage well casing = into the spare wheel (Y page 287). X Secure spare wheel ; by turning retaining screw : clockwise (Y page 287). Z Practical hints