2012 Kawasaki KX250F Owners Manual - Page 118
2012 Kawasaki KX250F Manual
Page 118 highlights
116 MAINTENANCE AND ADJUSTMENT the oil off completely from the left front fork • Wipe cylinder unit. Compress the piston rod to 200 a 250 mm (7.87 •a 9.84 in.) and hold the left front fork cylinder unit upright position for 10 minutes. oil leaks from the cylinder unit, replace the left • If front fork cylinder unit assembly. the left front fork cylinder unit on level ground • Hold and release the piston rod then check the piston j • rod extend to maximum. Tighten the locknut fully and measure 10 a 12 mm (0.39 a 0.47 in.) as shown in the figure. A. Left Front Fork Cylinder Unit B. Piston Rod C. 200 a 250 mm (7.87 a 9.84 in.) should be no oil leak from the left front fork • There cylinder unit. A. Locknut B. 10 a 12 mm (0.39 a 0.47 in.)
116
MAINTENANCE AND ADJUSTMENT
j
•
Wipe the oil off completely from the left front fork
cylinder unit.
•
Compress the piston rod to 200
°
250 mm (7.87
°
9.84 in.) and hold the left front fork cylinder unit
upright position for 10 minutes.
A. Left Front Fork Cylinder Unit
B. Piston Rod
C. 200
°
250 mm (7.87
°
9.84 in.)
•
There should be no oil leak from the left front fork
cylinder unit.
•
If oil leaks from the cylinder unit, replace the left
front fork cylinder unit assembly.
•
Hold the left front fork cylinder unit on level ground
and release the piston rod then check the piston
rod extend to maximum.
•
Tighten the locknut fully and measure 10
°
12 mm
(0.39
°
0.47 in.) as shown in the figure.
A. Locknut
B. 10
°
12 mm (0.39
°
0.47 in.)