Icom IC-T10 Advanced Manual - Page 43

6 OTHER FUNCTIONS Resetting If the transceiver has a malfunction caused by an external factor such as static electricity, reset it using the Partial Reset or All Reset function. BE CAREFUL! An All Reset clears all programming and returns all settings to the factory defaults. DDPartial Reset 1. Rotate [VOL] counter-clockwise to turn OFF the transceiver. 2. While holding down [H/M/L], rotate [VOL] clockwise to turn ON the transceiver. ••"Icom" and the voltage are displayed, and then the operating frequency is displayed. DDAll Reset 1. Rotate [VOL] counter-clockwise to turn OFF the transceiver. 2. While holding down [SET], [BAND], and [H/M/L], rotate [VOL] clockwise to turn ON the transceiver. ••"CLEAR," "Icom," and the voltage are displayed, and then the operating frequency is displayed. TIP: A Partial Reset resets the operating settings to their defaults without clearing the following: ••Memory Channel contents ••Scan Edge contents ••Call Channel contents ••DTMF memory contents ••Home Channel settings 6-12