Icom IC-T10 Advanced Manual - Page 33
Using the DTMF memory, Entering the DTMF code, Monitoring the entered DTMF code
View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
6 OTHER FUNCTIONS Using the DTMF memory The transceiver can save up to 16 memories of a 24 digit DTMF code. DDEntering the DTMF code 1. Push [SET] to enter the Set mode. ••A Set mode item is displayed. 2. Repeatedly push [SET] to select "dtmF." ••A DTMF memory channel number blinks. DDMonitoring the entered DTMF code You can check and hear the entered DTMF code. 1. Push [SET] to enter the Set mode. ••A Set mode item is displayed. 2. Repeatedly push [SET] to select "dtmF." ••A DTMF memory channel number blinks. 3. Rotate [DIAL] to select a DTMF memory channel to monitor. 4. Push [HOME] to exit the Set mode and start monitoring. [HOME] 3. Rotate [DIAL] to select a DTMF memory channel. 4. Hold down [SET] until two beeps sound. ••The first digit blinks, and the transceiver enters the DTMF code Entry mode. 5. Enter the DTMF code using the Ten-keypad. LLPush [MONI] to move the cursor to the right. LLPush [P] to move the cursor to the left. LLThe following 6 empty digits are displayed when you have entered the 6th digit. LLUp to 24 digits of code can be entered. 6. Push [PTT] to confirm the entry. ••The DTMF memory channel number blinks. DDClearing the DTMF memory contents You can clear the DTMF code that is no longer in use, as shown below. 1. Push [SET] to enter the Set mode. ••A Set mode item is displayed. 2. Repeatedly push [SET] to select "dtmF." ••A DTMF memory channel number blinks. 3. Rotate [DIAL] to select a DTMF memory channel. 4. Hold down [SET] until two beeps sound. ••The first digit blinks, and the selected DTMF memory channel content will be deleted. 7. Push [V/M/C] to exit the Set mode. 5. Push [PTT]. ••The DTMF memory channel number blinks. 6. Push [V/M/C] to exit the Set mode. 6-2