Icom IC-T10 Advanced Manual - Page 42

6 OTHER FUNCTIONS Cloning The transceiver has a data copying capability. This function is useful for copying all of the settings and entered contents from one transceiver to another. DDCloning between two transceivers An optional OPC-474 programming cable or 3.5 mm (1/8 inch) stereo jack cable (user supplied) is required. 1. Turn OFF the transceivers, and connect the master and sub-transceivers using the OPC-474 or stereo jack cable through their [SP] jacks. DDCloning using a PC Copy the data using the optional CS-T10 programming software and an OPC-478UC/OPC478UC-1 programming cable. Refer to the INSTRUCTIONS and the Help file that come with the programming software, for details. CAUTION: BE SURE to turn OFF the transceiver, before connecting or disconnecting an optional equipment to or from the [MIC/SP] jack. OPC-474 or 3.5 mm (1/8 inch) stereo jack cable (User supplied) OPC-478UC/OPC-478UC-1 2. Turn ON the sub-transceiver. 3. While holding down [V/M/C], turn ON the master transceiver to enter the Cloning mode. ••"CLOnE m" is displayed. 4. Push [PTT] on the master transceiver to start cloning. ••While cloning, "CL Out" is displayed on the master transceiver's function display. ••While cloning, "CL In" is displayed on the sub- transceiver's function display. ••When the cloning is finished, "CL End" is displayed on the sub-transceiver's function display. 6-11