Icom IC-T10 Advanced Manual - Page 34
Transmitting a DTMF code, Using a DTMF memory channel, Manual DTMF code transmission
View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6 OTHER FUNCTIONS Transmitting a DTMF code The transceiver has two ways of transmitting a DTMF code sequence. DDUsing a DTMF memory channel Transmit the DTMF memory contents (p. 6-2). 1. Push [SET] to enter the Set mode. ••A Set mode item is displayed. 2. Repeatedly push [SET] to select "dtmF-t." DDManual DTMF code transmission Transmit the DTMF code that you manually entered using the Ten-keypad. 1. Push [SET] to enter the Set mode. ••A Set mode item is displayed. 2. Repeatedly push [SET] to select "dtmF-t." 3. Rotate [DIAL] to select "mEm." 3. Rotate [DIAL] to select "kEy." 4. Push [V/M/C] to exit the Set mode. 5. While holding down [PTT], push DTMF channel numbers shown below to transmit. DTMF memory channel number assignment dB dC dA dD d0 ~ d9 dE dF 4. Push [V/M/C] to exit the Set mode. 5. While holding down [PTT], push the keys shown below to manually transmit a DTMF code sequence. DTMF code assignment B C A D 0 ~ 9 *(E) # (F) TIP: About the 1750 Hz tone When you select "t-CALL" in step 3, a 1750 Hz tone can be transmitted. zzWhile holding down [PTT], push [MONI] to transmit. LLYou can hear the 1750 Hz tone from a speaker. 6-3