Icom IC-T10 Advanced Manual - Page 30

5 SET MODE Initial Set Mode items DTMF speed (Default: 100) Power save (Default: Auto) Selects a rate at which DTMF memories send individual DTMF characters to accommodate your operating needs. ••Options: 100, 200, 300, or 500 milliseconds. Display mode (Default: FREq) Selects a display mode in the Memory mode. ••nAmE: Displays a memory channel name (p. 2-5) ••CH*: Displays a memory channel number. ••FREq: Displays a memory channel frequency. *When "CH" is selected, the usable functions and Set mode items will be restricted as shown below. BM: See the BASIC MANUAL for details. Usable functions when "CH" is selected: ••Memory Scan (p. 3-5) ••Selecting an output power (BM) ••Monitor function (BM) ••Adjusting the squelch level (BM) ••Using the Lock function (BM) ••Transmitting a DTMF code (p. 6-3) ••Home Channel function (BM) ••Set mode (Settable items are "PAUSE," "LIGHt," "mic G," "VOX," "VOX LV," "VOX.dLy," "VOX.tot," "dtmF-t," and "dtmF.") Selects an option for the Power Save function, which conserves the battery life. ••OFF: Turns OFF the function. ••2: Sets the duty cycle to 1:2. (ON: 0.1 sec, OFF: 0.2 sec) ••8: Sets the duty cycle to 1:8. (ON: 0.1 sec, OFF: 0.8 sec) ••16: Sets the duty cycle to 1:16. (ON: 0.1 sec, OFF: 1.6 sec) ••Auto: Automatically sets the duty cycle. When no operation occurs and no signal is received for 5 seconds, the transceiver enters the Power Save mode, and sets the duty cycle to 1:2. After 60 seconds, it sets the duty cycle to 1:16. Dial speed up (Default: On) Selects whether or not to accelerate the tuning speed when rapidly rotating [DIAL]. ••OFF: Turns OFF the tuning speed acceleration. ••On: Accelerates the tuning speed when rapidly rotating [DIAL]. MIC simple mode (Default: nORm-1) The Simple MIC function is used to assign the essential operations to the remote control unit, which will be connected through [SP] jack. See page 6-9 for details. ••Options: SImPLE, nORm-1, nORm-2 5-8