Icom IC-T10 Advanced Manual - Page 10
Selecting a Call channel, Entering Memory channels, Example: Entering 145.800 MHz into Channel 11
View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 MEMORY OPERATION Selecting a Call channel Call channels are used for quick recall of most often used operating frequencies. 1. Repeatedly push [V/M/C] to select the Call Channel mode. Entering Memory channels Example: Entering 145.800 MHz into Channel 11 1. Repeatedly push [V/M/C] to select the VFO mode. 2. Repeatedly push [BAND] to select the VHF band. 3. Set the frequency to 145.800 MHz. 2. Push [BAND] to toggle between the VHF call channel and UHF call channel. 4. Push [S.MW] until two short beeps sound. ••" " and the channel number blink. LLHolding down even after two short beeps sound writes the set frequency to the currently selected channel. 5. Rotate [DIAL] to select Channel 11. 6. Push [S.MW] until two short beeps sound to enter 145.800 MHz to Channel 11. ••The transceiver returns to the VFO mode. TIP: About the Auto Increment When entering the frequency to the Memory Channel in Step 6, hold down [S.MW] until three beeps sound, to write to the previous channel of the selected channel. 2-3