Icom IC-T10 Advanced Manual - Page 37
DTCS code squelch operation, About the DTCS polarity
View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
6 OTHER FUNCTIONS DTCS code squelch operation The tone squelch opens only when you receive a signal that includes a matching DTCS code in the FM or FM narrow (FM-N) mode. You can silently wait for calls from others using the same tone. Also, a reversed tone squelch function mutes the squelch when you receive a signal including a matching DTCS code. Step. 1 Setting the DTCS code 1. Repeatedly push [V/M/C] to select the VFO mode. 2. Hold down [MODE] until a beep sound to select an operating mode. 3. Set an operating frequency. 4. Push [SET]. 5. Repeatedly push [SET] to select "codE." 6. Rotate [DIAL] to set the DTCS code. DTCS codes indication DTCS code squelch DTCS code transmission DTCS Pocket Beep Reverse DTCS 7. Push [V/M/C] to exit the Set mode. Step. 2 Using the DTCS code squelch 1. Push [SET]. 2. Repeatedly push [SET] to select "tOnE." 3. Rotate [DIAL] to select a tone squelch type. TIP: Using the Pocket Beep function When the transceiver receives a signal, a beep sounds for 30 seconds and " " blinks. LLConfirm "P dtCS" is selected in the Set mode. (p. 5-3) DDAbout the DTCS polarity You can select an option for the DTCS polarity in the Set mode (p. 5-3). 4. Operate normally. LLYou will only hear the audio of stations using the same DTCS code. All other signals will be muted. 6-6