Epson WorkForce Pro WF-M4619 Users Guide - Page 343
Wi-Fi, Configuring Wired LAN Settings, Settings, General Settings, Network Settings, Network Status
![]() |
View all Epson WorkForce Pro WF-M4619 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
Administrator Information > Managing the Printer > Managing the Network Connection Items IPv6 Secondary DNS Server IEEE802.11k/v IEEE802.11r Setting value and Description When assigning IPv6 Secondary DNS Server, enter in the following format. ❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx ❏ xxxx is a hexadecimal number from 1 to 4 digits. ❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::. (Only one place). You can specify whether or not to enable IEEE802.11k/v. Displayed only when the wireless LAN function is available. You can specify whether or not to enable IEEE802.11r. Displayed only when the wireless LAN function is available. Wi-Fi You can check the Wi-Fi or Wi-Fi Direct connection status. To display the Wi-Fi Direct status, click Wi-Fi Direct tab. Note: For models that support Wi-Fi, this item is displayed when the Wireless LAN Interface is installed. ❏ Setup button When the Setup button is clicked, the Wi-Fi setup (infrastructure mode) screen is displayed. ❏ Disable Wi-Fi button When the Disable Wi-Fi button is clicked, the Wi-Fi (infrastructure mode) function is disabled. If you used to use Wi-Fi (wireless LAN) but no longer need to do so due to a change in connection mode and so on, by removing unnecessary Wi-Fi signals, you can also reduce the load on the printer's standby power usage. Note: You can also set up from the printer's control panel. Settings > General Settings > Network Settings Configuring Wired LAN Settings 1. Enter the printer's IP address into a browser to access Web Config. Enter the printer's IP address from a computer that is connected to the same network as the printer. You can check the IP address of the printer from the following menu. Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status 2. Enter the administrator password to log in as an administrator. 3. Select in the following order. Network tab >Wired LAN 343
![](/manual_guide/products/epson-workforce-pro-wfm4619-users-guide-c70c247/343.png)