Epson Moverio BT-200 Users Guide - Page 15

01_Chapter title 0By1us_inHg ethae sdupAplied lens holder, you can wear the head- set without the problems normally associated with wear0in2g__alheaedadset over glasses. Contact your local optician to fit custom lenses into the lens holder, and attach it to the headset. (The user is responsible for the cost of the lenses. Depending on the optician, they may not be able to install the custom lenses into the lens holder.) Getting Ready Turning On and Off Turning on Note Before turning on the product, check the charge level. ➡➡"Charging" on page 12 1 Slide the power switch to the [ ] side and hold it there until the LED indicator turns light-blue. Lens holder supported lenses Lens (W x H) 50 x 24 mm Nose pads 20 mm Frame PD 70 mm Curve 4 Note You may not be able to view images when using special lenses such as colored, mirrored, and polarized lenses. The LED indicator flashes light-blue when starting up. Startup is complete when the indicator stops flashing and turns solid light-blue. Wear the headset and check that the Home screen is displayed. Note • See the following for information on using the trackpad. ➡➡"Using the Trackpad" on page 17 • Turning off the screen while the product is on (Sleep mode) When you slide the power switch briefly to the [ ] side, the product enters Sleep mode and the LED indicator turns 15