BenQ W1110 User Manual - Page 51

Ensure the handle is fully laid flat and locked in place., Replace the lamp cover on the projector.

Get BenQ W1110 PDF manuals and user guides View all BenQ W1110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

8. Use the handle to slowly pull the lamp out of the projector. • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 9. As shown in the illustration, lower the new lamp. 10. Reconnect the lamp connector. 2 1 11. Tighten the screw that secures the lamp. 12. Ensure the handle is fully laid flat and locked in place. • Loose screws may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 13. Replace the lamp cover on the projector. 14. Tighten the screws that secure the lamp cover. • Loose screws may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. Maintenance 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
51
Maintenance
8.
Use the handle to slowly pull the lamp out of the
projector.
•
Pulling it too quickly may cause the lamp to break and
scatter broken glass in the projector.
•
Do not place the lamp in locations where water might splash
on it, children can reach it, or near flammable materials.
•
Do not insert your hands into the projector after the lamp is
removed. If you touch the optical components inside, it
could cause color unevenness and distortion of the projected
images.
9.
As shown in the illustration, lower the new lamp.
10. Reconnect the lamp connector.
11. Tighten the screw that secures the lamp.
12. Ensure the handle is fully laid flat and locked in place.
•
Loose screws may cause a bad connection, which could
result in malfunction.
•
Do not over tighten the screw.
13. Replace the lamp cover on the projector.
14. Tighten the screws that secure the lamp cover.
•
Loose screws may cause a bad connection, which could
result in malfunction.
•
Do not over tighten the screw.
2
1