BenQ W1110 User Manual - Page 31
Menu Type, Format, Reset Lamp, Timer, Settings, Information, Advanced, Reset, Reset Successfully
View all BenQ W1110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
• Menu Type • HDMI Format • Reset Lamp Timer • Reset All Settings • Information Switches to the Advanced OSD menu. Selects an input source type for the HDMI signal. You can also manually select the source type. The different source types carry different standards for the brightness level. HDMI Format is only available when the HDMI signal is selected. Activate this function only after a new lamp is installed. When you select Reset, a "Reset Successfully" message displays to notify that the lamp time has been reset to "0". Returns all settings to the factory preset values. The following settings will still remain: Keystone, Language, Projector Position, Reset Lamp Timer, and High Altitude Mode. Displays the following information about your projector. • Source: Displays the current signal source. • Picture Mode: Displays the current Picture Mode. • Resolution: Displays the native resolution of the input source. • Color System: Displays input system format. • Lamp Usage Time: Displays the number of hours the lamp has been used. • 3D Format: Displays the current 3D mode. 3D Format is only available when 3D Mode is enabled. • Firmware Version: Displays the firmware version of your projector. Some information is given only when certain input sources are in use. Menu Functions 31