BenQ W1110 User Manual - Page 28
Basic, Advanced, Settings, Menu Type, System Setup : Basic, Menu Settings
View all BenQ W1110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the instructions below: Use the arrow keys ( / / / ) on the projector or remote control to move through the menu items, and use OK to confirm the selected menu item. • When there is a video signal connected to the projector i. Go to the Settings > Menu Type menu and press OK. ii. Use / to select Advanced and press OK. iii. Press BACK again to access the Advanced OSD menu. • When there is NO video signal connected to the projector i. Go to the Menu Type menu and press OK. ii. Use / to select Advanced and press OK. iii. Press BACK again to access the Advanced OSD menu. Next time when you turn on the projector, you may access the Advanced OSD menu by pressing MENU. Below is the overview of the Advanced OSD menu. Picture Picture Mode User Mode Management Brightness 50 Contrast 50 Color 50 Tint 50 Sharpness 7 Color Temperature Lamp Power Advanced... Reset Current Picture Mode PC Vivid Normal Exit Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD menu, follow the instructions below: i. Go to the System Setup : Basic > Menu Settings > Menu Type menu and press OK. ii. Use / to select Basic to directly access the Basic OSD menu. Next time when you turn on the projector, you may access the Basic OSD menu by pressing MENU. 28 Menu Functions