2012 Yamaha Motorsports Phazer R-TX Owners Manual - Page 65

2012 Yamaha Motorsports Phazer R-TX Manual

Get 2012 Yamaha Motorsports Phazer R-TX PDF manuals and user guides View all 2012 Yamaha Motorsports Phazer R-TX manuals

Page 65 highlights

Periodic maintenance and adjustment 7. 8. 9. Insert the dipstick into the oil filler hole, and then tighten the oil filler cap. Connect the oil level gauge coupler. Install the right side cover (PZ50RT / PZ50GT / PZ50MT), or install the right side cover and the right upper cover, and then close the shroud (PZ50VT). Place the snowmobile on a level surface and apply the parking brake. Start the engine, warm it up for several minutes, and then turn it off. Remove the right side cover (PZ50RT / PZ50GT / PZ50MT), or open the shroud and remove the right upper cover and the right side cover (PZ50VT). (See page 49 for the procedures.) Remove the bottom panel by removing the bolts. 2 To change the engine oil 1. 2. 3. 1 1. Right lower cover 2. Bolt 6. 7. Place an oil pan under the oil tank to collect the used oil. Disconnect the oil level gauge coupler. 4. 1. Oil level gauge coupler 2. Oil filler cap 8. 2 1. Bottom panel 2. Bolt Remove the oil filler cap, and then remove the engine oil drain bolt and its gasket to drain the oil from the oil tank. 5. Remove the right lower cover by removing the bolts. 2 1. Engine oil drain bolt (oil tank) 2. Gasket 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Periodic maintenance and adjustment
59
7.
Insert the dipstick into the oil filler hole,
and then tighten the oil filler cap.
8.
Connect the oil level gauge coupler.
9.
Install the right side cover (PZ50RT /
PZ50GT / PZ50MT), or install the right
side cover and the right upper cover, and
then close the shroud (PZ50VT).
To change the engine oil
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Start the engine, warm it up for several
minutes, and then turn it off.
3.
Remove the right side cover (PZ50RT /
PZ50GT / PZ50MT), or open the shroud
and remove the right upper cover and the
right side cover (PZ50VT). (See page 49
for the procedures.)
4.
Remove the bottom panel by removing
the bolts.
5.
Remove the right lower cover by remov-
ing the bolts.
6.
Place an oil pan under the oil tank to col-
lect the used oil.
7.
Disconnect the oil level gauge coupler.
8.
Remove the oil filler cap, and then re-
move the engine oil drain bolt and its gas-
ket to drain the oil from the oil tank.
1.
Bottom panel
2. Bolt
2
1.
Right lower cover
2. Bolt
1.
Oil level gauge coupler
2.
Oil filler cap
1.
Engine oil drain bolt (oil tank)
2. Gasket
2
1
2