2012 Yamaha Motorsports Phazer R-TX Owners Manual - Page 58

2012 Yamaha Motorsports Phazer R-TX Manual

Get 2012 Yamaha Motorsports Phazer R-TX PDF manuals and user guides View all 2012 Yamaha Motorsports Phazer R-TX manuals

Page 58 highlights

Periodic maintenance and adjustment Tightening torques: Right upper cover bolt A: 8 Nm (0.8 m·kgf, 5.8 ft·lbf) Right upper cover bolt B: 3.0 Nm (0.30 m·kgf, 2.2 ft·lbf) 2. Install the top cover. Left and right upper covers (PZ50VT) 1. Top cover To install the top cover Insert the projections on the front of the top cover into the slots in the left and right upper covers, and then fit the projections on the rear of the top cover into the grommets. To remove an upper cover 1. Open the shroud. (See the above procedure.) 2. Loosen the fasteners, and then remove the upper cover. Right upper cover (PZ50RT / PZ50GT / PZ50MT) To remove the right upper cover 1. Remove the top cover. (See the above procedure.) 2. Remove the right upper cover by removing bolts A and bolt B. 1. Fastener 2. Left upper cover To install an upper cover 1. Insert the projections on the upper cover into the slots, fit the holders on the cover onto the grommets, and then tighten the fasteners. 3 2 1. Right upper cover bolt A 2. Right upper cover bolt B 3. Right upper cover To install the right upper cover 1. Place the right upper cover in the original position, and then install and tighten bolts A and bolt B to their specified torques. 1. Projection 2. Holder 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Periodic maintenance and adjustment
52
To install the top cover
Insert the projections on the front of the top
cover into the slots in the left and right upper
covers, and then fit the projections on the rear
of the top cover into the grommets.
Right upper cover (PZ50RT / PZ50GT /
PZ50MT)
To remove the right upper cover
1.
Remove the top cover. (See the above
procedure.)
2.
Remove the right upper cover by remov-
ing bolts A and bolt B.
To install the right upper cover
1.
Place the right upper cover in the original
position, and then install and tighten bolts
A and bolt B to their specified torques.
2.
Install the top cover.
Left and right upper covers (PZ50VT)
To remove an upper cover
1.
Open the shroud. (See the above proce-
dure.)
2.
Loosen the fasteners, and then remove
the upper cover.
To install an upper cover
1.
Insert the projections on the upper cover
into the slots, fit the holders on the cover
onto the grommets, and then tighten the
fasteners.
1.
Top cover
1.
Right upper cover bolt A
2.
Right upper cover bolt B
3.
Right upper cover
2
3
Tightening torques:
Right upper cover bolt A:
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
Right upper cover bolt B:
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
1. Fastener
2.
Left upper cover
1. Projection
2. Holder