2013 Polaris Ness Signature Series Cross Country Tour Owners Manual - Page 87
2013 Polaris Ness Signature Series Cross Country Tour Manual
Page 87 highlights
Maintenance Saddlebag Bumpers Saddlebag bumpers (if equipped) can be removed. Be sure to retain the M6 screws, nut plates and spacer plates for future reinstallation. 1. Remove the saddlebags. 2. Remove the five (5) screws securing each bumper to the frame, along with the nut plate and spacer plate. M8 Screw M6 Screws M8 Screws Nut Plate Spacer Plate 3. Remove the bumpers. Place bumpers and hardware in a secure location for future reinstallation, with the exception of the three (3) M8 screws on each side. 4. Reinstall the M8 screws for mufflers and saddlebag bracket. Torque: 18 ft-lbs (24.4 Nm) 5. Reinstall the saddlebags. 6. To reinstall the saddlebag bumpers, reverse the removal instructions, using the hardware removed with the bumpers. Tighten the bumper screws to the following specifications: Torque: 84 in-lbs (9.4 Nm) for M6 fasteners Torque: 18 ft-lbs (24.4 Nm) for M8 fasteners Step 4 85