2013 Polaris Ness Signature Series Cross Country Tour Owners Manual - Page 118

CB Radio / ICOM System Push-to-Talk (PTT) Press and hold the top or bottom of the PTT button to transmit over CB radio. The passenger must push and hold the PTT button on the headset controls. Tip: PTT will activate the intercom when the intercom is turned on and the CB is turned off. Squelch Squelch blocks undesired signals and noise by allowing the reception of signals only over a specified level. Press and release the SQ (+) or SQ (-) buttons to adjust the squelch to any level between OPEN and CLOSED. + SQ SQUELCH 8 "TX" will display on the console screen when one of the PTT buttons is pressed. "RX" will display when the CB is receiving a transmission. FM ICOM TX19 100.5 Transmitting FM ICOM RX19 When squelch is set to OPEN, no filtering occurs. Setting squelch to CLOSED blocks all signals, including strong signals. To set the squelch level, first lower the squelch level until noise or static is audible. Gradually increase the squelch level until the noise or static is gone. 100.5 Receiving Driver CB Radio Volume To change settings, enter the mode menu. Press TUNE (+) or TUNE (-) to adjust settings. + TUNE CB VOL 15 Tip: The CB volume can also be set using the hand control when the CB is receiving. Passenger CB Radio Volume The passenger can control rear headset volume when Entertainment, CB radio or ICOM is active. Press (+) or (-) on the headset control to raise or lower volume. 116