2013 Polaris Ness Signature Series Cross Country Tour Owners Manual - Page 25
2013 Polaris Ness Signature Series Cross Country Tour Manual
Page 25 highlights
Instruments, Features and Controls Instrument Cluster (CROSS ROADS) Multi-Function Display Engine Error Codes Suspect Parameter Error Code Number (SPN) The error screen displays only when the Number (0-9) CHECK ENGINE light is on or when it goes on and off during one ignition cycle. Error codes are not stored. When the key is turned OFF, the code and message is lost, but will reappear if the fault reoccurs after restarting the engine. If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes from the display. 1. If the error codes are not displayed, use Failure Mode Indicator (FMI) the mode button to toggle until "Ck ENG" displays on the main line of the display. 2. Press and hold the mode button to enter the diagnostics code menu. 3. Record the three numbers displayed in the gear position, clock and odometer displays. 4. See an authorized VICTORY dealer for code details and diagnosis. Low Oil Pressure Display "LO OIL" displays under the following conditions. Condition Indicates Action Required Stop the engine as soon as safely possible and check the oil level. If the oil level is sufficient, but "LO OIL" continues to display after restarting the engine, stop the engine immediately. None - After two seconds the display will return to the most recently active menu. Press and release the MODE button to return to the most recently active menu. Engine oil pressure has Oil pressure is below a dropped while the safe operating pressure. engine is running. The key is turned to ON The indicator circuit is or PARK. operating properly. The stop/run switch is moved to STOP. The system is operating properly. 23