2013 Polaris Ness Signature Series Cross Country Tour Owners Manual - Page 28

Instruments, Features and Controls Instrument Cluster (CROSS COUNTRY) Multi-Function Display Use the mode button to toggle through the modes of the multi-function display. See page 29. Permanently Displayed Modes • Clock • Gear Position • Ambient Temperature Clock Trip Computer Modes Gear Position • Odometer • Trip Odometers (Trip 1, Trip 2) • Average Fuel Economy Trip Computer Temperature • Average Speed • Fuel Range • Instantaneous Fuel Economy • Trip Hours Meter Tip: Press and hold the mode button to reset the trip odometer, average fuel economy, average speed or trip hours meter. Engine Error Codes The error screen displays only when the CHECK ENGINE light is on or when it goes on and off during one ignition cycle. Error codes are not stored. When the key is turned OFF, the code and message is lost, but will reappear if the fault reoccurs after restarting the engine. If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes from the display. 1. If the error codes are not displayed, use the mode button to toggle until "Err" displays in the clock area. 2. Record the three code numbers displayed in the gear position, temperature and odometer displays. 3. See an authorized VICTORY dealer for code details and diagnosis. Error Code Number (0-9) "Err" Avg Speed Range Inst Time TRIP 1 km / h TRIP 2 miles / gal Suspect Parameter Number (SPN) 88:88 188 88: 8 8: 8.8 8 Failure Mode Indicator (FMI) F C 26